|
|
Fire station Vyškov
Zápařka, Roman ; Jendryščíková, Kateřina (referee) ; Petříček, Tomáš (advisor)
This thesis focuses on the design and preparation of project documentation Fire Rescue Station South Moravia, in Vyskov p.č.2472 / 1. Building design respects the city plan. It is shape and matter does not form an accent. The building is divided into three operating units on the premises standing together with garages, as well as workplace Prevention Department and the Department regional office. It has three floor and one souterrain, roof flat.
|
|
|
Fire station, Chrudim
Bezdička, Petr ; Müllerová, Eva (referee) ; Müller, Jan (advisor)
The subject of the thesis is the elaboration of the design documentation for the execution of the fire station. The fire station building will be used for continuous performance of the fire protection units of the Fire and Rescue Service of the Czech Republic for the Pardubice region. The proposed fire station building is divided into two operational units. The first part is administrative, two storey. The second part is the ground floor part of the garage stalls, service and car wash, along with the necessary warehouses. The two units are operationally linked. The construction system of the building is wall made of ceramic masonry in part of the administration, the roof structure is designed as a single-sheathed flat roof. The cladding is done from a certified contact cladding system. The second part of the object consists of a steel skeleton with truss ties. The sheathing, both horizontal and vertical, is made up of sandwich panels.
|
|
|
Fire Station Type C2
Wojcik, Jindřich ; Dohnal, Jakub (referee) ; Fuciman, Ondřej (advisor)
Diplom thesis is about design of the fire station of type C2 for the HZS. The building is divided into two parts. First part of a building is designed as a rectangular recessed floor. The first part of building consists of two floors and one underground floor. Roofed by a single-layer flat roof of soft PVC. The building will be used to perform the services, the fire brigade. It will be used 24 hours a day. In the basement is located warehouse, HVAC room, utility room and a lounge with an alternative source of electricity. On the first floor are designed garages for storage technique and also the dressing room, workroom, washing box, warehouse, room for chemical-technical service and concierge. The second floor is designed to serve firefighters. The second part of the building is a training tower, which will be used to train firefighters and for drying hoses. The training tower is designed as a simple steel structure with four floors. The project was developed in the educational version of ArchiCAD 16th project is designed in accordance with the requirements of a layout, architectural design, structural design proper and safe use of the building.
|
|
|
Fire station
Schwarzová, Veronika ; Mizerová,, Lenka (referee) ; Smolka, Radim (advisor)
Diploma thesis solves the creation of layout study and creation of documentation for the realization new fire station. It is an object amenities used to perform the fire protection services unit of the population of the professional fire category JPO I. The type of fire station is P2. The building layout consists of three interconnected buildings arranged in a U. Structurally the building is divided into two systems. The middle part of the building consists of reinforced concrete skeleton, which has two floors. On the ground floor is garage, on the second floor are located facilities for firefighters. The side buildings connected to the skeleton are build of ceramic bricks, it is a wall system. The main entrance to the building is in the south building at the level of the first floor, where is situated the administrative and operational part of building. This building has two floors. From the northern side, the technical background of the fire station and the workshop are connected to the middle part of the buildin The building is basementless and is roofed by flat roofs only. The object is located on the edge of the Kaplice town, the terrain is slightly sloping. The solved area contains a few related objects.
|
|
|
Realization of Construction of Firehouse in Ždírec nad Doubravou
Kazda, Jiří ; Bříza, Lukáš (referee) ; Mohapl, Martin (advisor)
The master´s thesis describes the realization of new building of fire station in Ždírec nad Doubravou. The parts of the thesis are time and financial plan for all building objects, assessment of transport routes, design of site equipment and design of main machines. An itimized budget with a bill of quantities and a detailed construction schedule are prepared for the main building. A technological regulativ and quality control plan are prepared for the stage of industrial steelconcrete floor. In the end of the work, there is solved the noise study of construction and the topic of system infiltration tanks.
|
|
|
fire station
Peňáz, Lubomír ; Mátl,, Miroslav (referee) ; Moudrý, Ivan (advisor)
The content of this thesis is the design layout and construction of the building of new fire station in South Moravian Region. It is an object split into two interconnected parts: administrative - two-storey, basementless garage for trucks - single-storey, basementless The object is used to perform the services of eight firefighters per shift and one full-time worker. Architecture was chosen so that the object is functionally meet the requirements of firefighters on duty at both organizational (work on PS) and at the operational (exit) procedure. The building is covered with a flat roof, attic walled building on the peripheral wall with white facade and symbols accentuating the purpose of the building. The inner workings of the object are designed to meet the performance demands of service 24ti - hour shifts. The building is brick, based on the footings and load distribution base. The roof structure is made of reinforced concrete load-bearing concrete slab with heat-waterproofing layers classical arrangement of layers. The building is insulated ETICS. This - the operational part is located on the 1st and 2nd floor of the south-western part of the building, single-storey garage built for trucks in the northeastern part.
|
|
|
Fire station
Kaňa, Josef ; Kacálková, Lenka (referee) ; Kacálek, Petr (advisor)
The diploma thesis named Fire Station deals with project documentation at the level of construction execution documentation for a fire station. The building is located on the outskirts of Holešov in the part called Všetuly. The building is located in close proximity to the existing production plants, the local industrial zone, which is accessible from outside the city and close to the approach to the under-construction D49 and part of the city bypass. The project deals with the location of the building on the land, including paved areas and their connection to existing roads, the project also includes the location of sports fields for physical training. The building is designed as a two-story building with five parking spaces for emergency vehicles, where this space extends over both floors. On the 1st floor, the technical facilities of the station with storage and a dirty changing room are designed. On the 2nd floor, emergency rooms and offices of serving firefighters with hygienic facilities are designed. The station is designed according to the Fire Protection Act size P2 for a JPO I category unit with 24 serving firefighters in three shifts. As part of the proposal, vehicles at the existing unit were considered AZ – 30 M1Z Novus, CAS 3 – T815, CAS 20 – S2Z MB, KHA, TA – MAN, Škoda Kamiq.
|
|
|
Fire station in Pacov
Samec, Petr ; Klubalová, Pavlína (referee) ; Brzoň, Roman (advisor)
This Diploma thesis is a project documentation of a fire station building. It is about a spacious building that contains space and equipment needed for working of the fire station of professional and voluntary firefighters. The construction is situated at the edge of the town Pacov in Vysočina region. Downstairs there are placed garages for firefighters ‘vehicles, technical areas and a changing room. Upstairs there are offices, a gym, and rooms for firefighters. The building has a rectangular floor plan with a flat vegetation roof. The building is made of calcareous sandstone blocks with contact insulation.
|
|
|
Fire station P3 in Hlučín
Komárková, Jana ; Klímek, Karel (referee) ; Čuprová, Danuše (advisor)
The subject of the diploma thesis is a new building of the P3 fire station in Hlučín. The facility will be used to perform the fire protection service of the population of the district fire brigade and municipal volunteer fire fighters. The fire station is designed as an isolated structure of rectangular shape, which is divided into three parts, and it is operationally and structurally interconnected. First part is partly underground two-storey administrative. The second part of the building is an exit garage and the third part forms of the technical background of the fire station. The object is designed as classic brick technology from Porotherm ceramic blocks on reinforced concrete base strips. The roof of part of fire and garage facilities is saddle, the roof of the technical background is flat.
|
|
|
Fire Station
Herman, Tomáš ; Havířová, Zdeňka (referee) ; Lavický, Miloš (advisor)
Processed topic of final thesis is fire station type P in Brno - Líšeň. Object is composed from three parts, main building, garage for fire vehicles and garage for other vehicles. Main entrance and exits from the garages are situated on southeast. Garages are single-storey, main building has two floors. Object has a pitched roofs with metal roofing. Foundations are from concrete and reinforced concrete. Structural system is partly masonry and partly reinforced concrete frame.
|
guest ::
